ASTM A568/A568M DS Type B 1006 Introduce
ASTM A568/A568M is an American material standard for steel that covers both hot-rolled and cold-rolled carbon steel sheets and strips. It was first issued in 1994 and revised in 2020. ASTM A568/A568M DS Type B 1006 is used for steel products such as coils, sheets, bars, strips, plates, and structural shapes such as angles, channels and rounds. This material is regarded as high-quality and is specified for a wide variety of purposes.
Smelting temperature:1587°C - 1426°C
Application:Hot rolled and cold rolled high strength low alloy carbon steel sheet
ASTM A568/A568M DS Type B 1006 Material Chemical Composition
The chemical composition of the ASTM A568/A568M DS Type B 1006 steel are as follows:
| Element | Min | Max |
|---|---|---|
| Carbon (C) | 0.0200 | 0.0800 |
| Manganese (Mn) | - | 0.4500 |
| PhOsphorus (P) | - | 0.0200 |
| Sulfur (S) | - | 0.0300 |
| Nickel (Ni) | - | 0.2000 |
| Chromium (Cr) | - | 0.1500 |
| Molybdenum (Mo) | - | 0.0600 |
| Copper (Cu) | - | 0.2000 |
| Vanadium (V) | - | 0.0080 |
| Aluminum (Al) | 0.0200 | - |
| Niobium (Nb) | - | 0.0080 |
ASTM A568/A568M DS Type B 1006 Material Mechanical Properties
ASTM A568/A568M is the American Society for Testing and Materials (ASTM) International standard which specifies the requirements for carbon steel, high-strength low-alloy (HSLA) steel for use in structural applications. It covers various grades of HSLA and other steels such as carbon steel, cold-rolled steel and hot-rolled steel.
The mechanical properties of the ASTM A568/A568M DS Type B 1006 steel are as follows:
| YieldRp0.2 | ≤ 947 (MPa) |
| TeileRm | ≤ 391 (MPa) |
| ImpactKV/Ku | 23(J) |
| ElongationA | 12% |
| Reduction in cross section on fractureZ | 42% |
| As-Heat-Treated Condition | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Brinell hardness (HBW) | 313 |
ASTM A568/A568M DS Type B 1006 Material Thermal Properties
The thermal performance parameters of the ASTM A568/A568M DS Type B 1006 steel are as follows:
| Temperature (°C) | 34 | 584 | 997 |
| Modulus of elasticity (GPa) | - | 924 | - |
| Mean coefficient of thermal expaion ×10-6/(°C) | - | - | 44 |
| Thermal conductivity (W/m·°C) | - | 21.3 | 21.2 |
| Specific thermal capacity (J/kg·°C) | - | 113 | - |
| Specific electrical resistivity (Ω mm²/m) | 0.24 | - | - |
| Deity (kg/dm³) | - | - | 224 |
| Poisson’s coefficient, ν | - | - | 243 |