The ASTM A312/A312M standard is typically used for constructing austenitic stainless steel pipes used in a variety of applications. These include pressurized water systems, such as those in cooling systems, pump and valve systems, and storage tank systems. It is also used in process piping, such as in chemical plants, oil refineries, and petrochemical plants; and in pressure vessels and boilers. In addition, the standard is used in food and beverage processing equipment, as well as in automotive and aerospace applications.

ASTM A249/A249M Type 347 is a type of steel referred to as a welded austenitic steel boiler and super heater tubes. It is a carbon steel alloy primarily composed of chromium and nickel, and may also include other elements such as copper and molybdenum. The mechanical properties of ASTM A249/A249M Type 347 are remarkable, making it a popular choice for many components in various industries, such as plumbing, heating, and cooling systems.

ASTM A479/A479M 316 pressure vessel steel is preferred in these industries because of its high strength and corrosion resistance. This steel has a higher yield and tensile strength than other types of steel, making it more resistant to deformation and structural failure under high pressure. Additionally, the steel's resistance to corrosion makes it highly durable and long-lasting, even in harsh environments.

ASTM A249/A249M Type 202 is a type of steel referred to as a welded austenitic steel boiler and super heater tubes. It is a carbon steel alloy primarily composed of chromium and nickel, and may also include other elements such as copper and molybdenum. The mechanical properties of ASTM A249/A249M Type 202 are remarkable, making it a popular choice for many components in various industries, such as plumbing, heating, and cooling systems.

The ASTM A790/A790M steel standard requires that all materials used in the construction of a pipe system be identified. This includes the type and grade of material, as well as any intermixing of materials. The standard also outlines requirements for the material to be free of any defects and testing for any weld imperfections. The pipe segments must also meet the prescribed minimum strength requirements and be free of any cracks, weld flash or undercut.

JIS G3463 SUS 444 TB is widely used in the construction of pressure vessels, boilers and other parts involving high temperature and high pressure. It is an economical and reliable material, providing excellent strength and durability. It is also used in other fabrication industries, such as shipbuilding, bridge building and crane construction.

ASTM A240/A240M A240 S35135 is an international standard that specifies requirements for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. It applies to the following grades: type 304, 304L, 316, 316L, 321, and 347, for rolled and forged products; and type 304H, 347H, 17-4PH, 630, and 631/N08367, for hot- and cold-rolled sheet and strip.

The EN 10028-7 standard sets out specific requirements for the production of steel products. It encompasses not only the quality of the steel but also the specification for the use of it. For example, the standard requires that the steel be tested for soundness and ductility, as well as for conformity to the mechanical properties and chemical composition specified in the standard. This ensures that only the highest quality steel is used in the making of each product, offering customers peace of mind.

ASTM A249/A249M A249 Type 305 is a type of steel referred to as a welded austenitic steel boiler and super heater tubes. It is a carbon steel alloy primarily composed of chromium and nickel, and may also include other elements such as copper and molybdenum. The mechanical properties of ASTM A249/A249M A249 Type 305 are remarkable, making it a popular choice for many components in various industries, such as plumbing, heating, and cooling systems.

GB/T 20878 06Cr19Ni10N is a grade of hardened steel with a wide variety of applications in the engineering and fabrication industry. Its thermal properties make it an excellent choice in applications that require heat resistance, dimensional accuracy, and strength. Thanks to its versatility, this hardened steel is an excellent choice for a wide variety of projects.

ASTM A240/A240M S44400 is an international standard that specifies requirements for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. It applies to the following grades: type 304, 304L, 316, 316L, 321, and 347, for rolled and forged products; and type 304H, 347H, 17-4PH, 630, and 631/N08367, for hot- and cold-rolled sheet and strip.

EN 10088-1 1.4615 is applicable to flat products; long products including bars and rods, wire and slabs; oxide-coated products; and corrosion-resistant products such as valves and fittings. It covers stainless steels of the following grades: austenitic, ferritic, martensitic, and duplex (a blend of austenitic and ferritic) as well as precipitation-hardening steels. The standard also designates several additional application requirements for these grades, such as temper rolling or cold processing, or additional heat treatment or surface modifications.

The most common use for ASME SA-213/SA-213M Grade T7 is in boilers, but it is also common to see it used in pressure vessels, heat exchangers and piping systems. The alloy is well suited for these types of applications due to its strong resistance to corrosion, strength and weldability. It is also resistant to elevated temperatures, making it ideal for use around hot areas.

ASME SA-213/SA-213M SA-213 TP347LN steel is a type of steel alloy used in engineering and construction applications. It is composed of an alloy of iron, carbon, and other elements and is used to make many mechanical components, such as pipes and pressure vessels. The chemical properties of ASME SA-213/SA-213M SA-213 TP347LN steel are important for understanding its behavior in different applications.

JIS G3459 SUS 315J1 TP pipes specified in this standard generally fall under the category of stainless steel pipes. The material that is used for the manufacture of these pipes is the stainless steel. Stainless steel is a material comprised of various mixtures of iron and other elements such as nickel, titanium, chromium, and carbon. These elements give stainless steel its remarkable properties such as corrosion resistance, durability, and strength. It is because of these properties that stainless steel is used in a wide range of applications and products, including kitchen appliances, automobiles, and industrial machinery. The stainless steel pipes conforming to JIS G3459 SUS 315J1 TP are divided into different categories depending on their outer diameter, wall thickness, length and form. The categories are as follows, 1) Light Wall Pipes, 2) Medium Wall Pipes, 3) Thick Wall Pipes, 4) Long Length and 5) Special Lengths. These pipes could also be manufactured in two different forms i.e. seamless and welded.