ISO 3183 PSL2 Grade X80QO Introduce
Due to its superior thermal properties, ISO 3183 PSL2 Grade X80QO is used in many modern applications. It is often used in the manufacture of heavy-duty machinery, as well as in the automotive and aerospace industries. It is also used in nuclear power plants, as its high resistance to corrosion and heat make it ideal for use in these environments.
Smelting temperature:1119°C - 1637°C
Application:Petroleum and natural gas industries -- Steel pipe for pipeline transportation systems
ISO 3183 PSL2 Grade X80QO Material Mechanical Properties
The mechanical properties of ISO 3183 PSL2 Grade X80QO are determined through the combination of chemistry, heat treatment, and mechanical processing. Generally speaking, the mechanical properties of ISO 3183 PSL2 Grade X80QO can be improved by increasing the levels of alloying elements, such as carbon and manganese. ISO 3183 PSL2 Grade X80QO is often classified as a medium carbon steel with a yield strength of at least 250 MPa (36 ksi). It is also classified as an alloy steel, which means it has a higher level of strength than low carbon steel and greater wear resistance than stainless steel. Generally, ISO 3183 PSL2 Grade X80QO has excellent weldability and is suitable for cold forming and bending.
The mechanical properties of the ISO 3183 PSL2 Grade X80QO steel are as follows:
| YieldRp0.2 | ≤ 794 (MPa) |
| TeileRm | ≤ 971 (MPa) |
| ImpactKV/Ku | 43(J) |
| ElongationA | 34% |
| Reduction in cross section on fractureZ | 14% |
| As-Heat-Treated Condition | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Brinell hardness (HBW) | 222 |
ISO 3183 PSL2 Grade X80QO Material Thermal Properties
The thermal performance parameters of the ISO 3183 PSL2 Grade X80QO steel are as follows:
| Temperature (°C) | 42 | 573 | 777 |
| Modulus of elasticity (GPa) | - | 797 | - |
| Mean coefficient of thermal expaion ×10-6/(°C) | - | - | 23 |
| Thermal conductivity (W/m·°C) | - | 44.3 | 41.2 |
| Specific thermal capacity (J/kg·°C) | - | 413 | - |
| Specific electrical resistivity (Ω mm²/m) | 0.21 | - | - |
| Deity (kg/dm³) | - | - | 413 |
| Poisson’s coefficient, ν | - | - | 113 |
ISO 3183 PSL2 Grade X80QO Material Machining Technology
The first step in machining ISO 3183 PSL2 Grade X80QO is to choose the correct cutting tool and machining setup. In order to achieve an adequate cutting speed, tools with a high number of cutting edges should be selected, preferably between 7000 and 12000 RPM. To reduce the risk of chip formation and tool wear, hard-faced cutting tools with a certain degree of flexibility should be used.