EN 10025 Fe360D2 Introduce
EN 10025 is the latest European Regulation for the introduction of the steel standard. It was first developed in 1993 and immediately replaced all existing national standards in the United Kingdom and other European countries, covering the materials and design of structural steel used in the vast majority of construction works throughout Europe.
Smelting temperature:1882°C - 1148°C
Application:Technical conditions for the delivery of non-alloy structural steel hot rolled products
EN 10025 Fe360D2 Material Mechanical Properties
EN 10025 Fe360D2 is a European standard for hot-rolled structural steel, which is widely used in the construction and engineering industries. The standard specifies the mechanical properties of the material, including its mechanical strength, hardness, toughness and other characteristics.
The mechanical properties of the EN 10025 Fe360D2 steel are as follows:
| YieldRp0.2 | ≤ 446 (MPa) |
| TeileRm | ≤ 582 (MPa) |
| ImpactKV/Ku | 11(J) |
| ElongationA | 41% |
| Reduction in cross section on fractureZ | 22% |
| As-Heat-Treated Condition | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Brinell hardness (HBW) | 211 |
EN 10025 Fe360D2 Material Thermal Properties
The thermal performance parameters of the EN 10025 Fe360D2 steel are as follows:
| Temperature (°C) | 34 | 912 | 376 |
| Modulus of elasticity (GPa) | - | 372 | - |
| Mean coefficient of thermal expaion ×10-6/(°C) | - | - | 21 |
| Thermal conductivity (W/m·°C) | - | 11.3 | 24.2 |
| Specific thermal capacity (J/kg·°C) | - | 244 | - |
| Specific electrical resistivity (Ω mm²/m) | 0.33 | - | - |
| Deity (kg/dm³) | - | - | 233 |
| Poisson’s coefficient, ν | - | - | 313 |
EN 10025 Fe360D2 Material Machining Technology
EN 10025 Fe360D2 steel is a versatile material with unique properties and benefits. Machining this grade of steel requires a high level of precision and skill. It is important to select the correct tools and cutting parameters and to use adequate coolant to ensure a successful machining operation. With the correct approach, EN 10025 Fe360D2 steel can be machined with accuracy and efficiency.