EN 10028-3 1.8905 Introduce
EN 10028-3 is a European standard for steel used in pressure vessels and heat exchangers. It outlines the requirements for the manufacture and use of steel products. The EN 10028-3 standard covers a wide range of steel products including carbon steel, low alloy steel, and non-alloy steel products.
Smelting temperature:1498°C - 1334°C
Application:Pressure flat steel products - Part 3: Weldable fine grain steel, normalized
EN 10028-3 1.8905 Material Chemical Composition
The chemical composition of the EN 10028-3 1.8905 steel are as follows:
| Element | Min | Max |
|---|---|---|
| Vanadium (V) | - | 0.2000 |
| Titanium (Ti) | - | 0.0300 |
| Silicon (Si) | - | 0.6000 |
| Sulfur (S) | - | 0.0200 |
| PhOsphorus (P) | - | 0.0250 |
| Nickel (Ni) | - | 0.8000 |
| (Nb+Ti+V) | - | 0.2200 |
| Niobium (Nb) | - | 0.0500 |
| Nitrogen (N) | - | 0.0200 |
| Molybdenum (Mo) | - | 0.1000 |
| Manganese (Mn) | 1.0000 | 1.7000 |
| Copper (Cu) | - | 0.7000 |
| Chromium (Cr) | - | 0.3000 |
| Carbon (C) | - | 0.2000 |
| Aluminum (Al) | 0.0200 | - |
| Sulfur (S) | - | 0.0250 |
| PhOsphorus (P) | - | 0.0300 |
| Nitrogen (N) | - | 0.0250 |
| Copper (Cu) | - | 0.2000 |
| Aluminum (Al) | 0.0200 | - |
EN 10028-3 1.8905 Material Mechanical Properties
The mechanical properties of EN 10028-3 1.8905 steel are quite impressive. It is known for having excellent tensile strength, yield strength, and creep resistance. Even when exposed to extremely high temperatures, the mechanical properties will not degrade. This makes EN 10028-3 1.8905 steel an excellent choice for components that need to be able to withstand powerful forces and heat.
The mechanical properties of the EN 10028-3 1.8905 steel are as follows:
| YieldRp0.2 | ≤ 454 (MPa) |
| TeileRm | ≤ 899 (MPa) |
| ImpactKV/Ku | 42(J) |
| ElongationA | 33% |
| Reduction in cross section on fractureZ | 21% |
| As-Heat-Treated Condition | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Brinell hardness (HBW) | 224 |
EN 10028-3 1.8905 Material Thermal Properties
The thermal performance parameters of the EN 10028-3 1.8905 steel are as follows:
| Temperature (°C) | 14 | 552 | 545 |
| Modulus of elasticity (GPa) | - | 647 | - |
| Mean coefficient of thermal expaion ×10-6/(°C) | - | - | 24 |
| Thermal conductivity (W/m·°C) | - | 32.3 | 14.2 |
| Specific thermal capacity (J/kg·°C) | - | 341 | - |
| Specific electrical resistivity (Ω mm²/m) | 0.11 | - | - |
| Deity (kg/dm³) | - | - | 321 |
| Poisson’s coefficient, ν | - | - | 231 |
EN 10028-3 1.8905 Material Machining Technology
EN 10028-3 1.8905 steel is a ferritic steel, part of the European standard steel series. It is often used in the manufacturing industry due to its properties, such as superior mechanical and thermal properties. Machining of this steel is becoming increasingly important due to its high strength and good machinability characteristics.