EN 10083-2 1C60 Introduce
EN 10083-2 1C60s are commonly used in many different industries, such as automotive, construction, aerospace, and oil and gas. In the automotive industry, the steel is often used for components such as structural members, suspension components, and engine parts. In construction, the steel is used for structural beams, columns, and other components. Similarly, it is often used for parts in aerospace and oil and gas equipment.
Smelting temperature:1213°C - 1827°C
Application:Quenched and tempered steel - Part 2: Technical delivery conditions for non-alloy steel
EN 10083-2 1C60 Material Mechanical Properties
EN 10083-2 1C60 steel is a medium-carbon steel and is one of the most widely used steel specifications in the world. This type of steel is classified as a quenched- and tempered steel and is available in several grades that differ in carbon content, microstructure, and mechanical properties. The properties of EN 10083-2 1C60 steel make it ideal for a wide range of applications, including automotive, construction, agriculture, and medical devices. The mechanical properties of this type of steel are key to its applications and must be taken into account when selecting EN 10083-2 1C60 steel for use in a project.
The mechanical properties of the EN 10083-2 1C60 steel are as follows:
| YieldRp0.2 | ≤ 953 (MPa) |
| TeileRm | ≤ 177 (MPa) |
| ImpactKV/Ku | 44(J) |
| ElongationA | 33% |
| Reduction in cross section on fractureZ | 32% |
| As-Heat-Treated Condition | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Brinell hardness (HBW) | 242 |
EN 10083-2 1C60 Material Thermal Properties
The thermal performance parameters of the EN 10083-2 1C60 steel are as follows:
| Temperature (°C) | 22 | 321 | 333 |
| Modulus of elasticity (GPa) | - | 691 | - |
| Mean coefficient of thermal expaion ×10-6/(°C) | - | - | 21 |
| Thermal conductivity (W/m·°C) | - | 41.3 | 22.2 |
| Specific thermal capacity (J/kg·°C) | - | 444 | - |
| Specific electrical resistivity (Ω mm²/m) | 0.44 | - | - |
| Deity (kg/dm³) | - | - | 213 |
| Poisson’s coefficient, ν | - | - | 421 |
EN 10083-2 1C60 Material Machining Technology
It is also important to ensure a good lubrication process during machining. A suitable lubricant should be chosen depending on the cutting parameters. In most cases, ISO mineral oil is sufficient for lubricating EN 10083-2 1C60 steel components. However, for more demanding operations, it is best to use semi-synthetic or full synthetic lubricants.